Table of Contents
Advertisement
Quick Links
Notice to Customer
Thank you very much for purchasing this product.
● This product requires installation and wiring work.
Always have installation and wiring performed by a
professional contractor.
● Before use, please read this manual carefully and use
the product correctly. Also, keep this manual safe for
future reference.
● If you have any questions, contact your nearest
PATLITE sales representative listed at the end of the
manual.
● When this product is installed and used in a vehicle,
it may be regulated by the laws and regulations of the
region where it is used. Please check the local laws
and regulations where this product is used.
To the Contractor
● Prior to installation, read this manual thoroughly to
ensure it is installed correctly.
● Return this manual to the customer.
Flashing Beacon
GL10 Series
TYPE
Instruction Manual
[Web Version]
1. Before You Begin
2. Model Number Configuration
3. Package Contents
4. Names and Dimensions
5. Features of Product
6. Product Functions
7. Mounting Method
8. Wiring Method
9. Communication Specifications
10. Troubleshooting
11. Specifications
GA0009810_01
page
4
7
8
9
11
12
17
18
20
30
32
Advertisement
Table of Contents
Related Manuals for Patlite GL10 Series
Summary of Contents for Patlite GL10 Series
- Page 1 Also, keep this manual safe for 4. Names and Dimensions future reference. ● If you have any questions, contact your nearest PATLITE sales representative listed at the end of the 5. Features of Product manual. ● When this product is installed and used in a vehicle, 6. Product Functions...
-
Page 2: Table Of Contents
Flashing Beacon Table of Contents 1. Before You Begin ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 4 1.1. About Safety Symbols ……………………………………………………………………………… 4 1.2. Safety Precautions …………………………………………………………………………………… 5 2. Model Number Configuration ＿ ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 7 3. Package Contents ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 8 4. Names and Dimensions ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 9 4.1. GL10-M1NC1-T ……………………………………………………………………………………… 9 4.2. GL10-M1N-T ……………………………………………………………………………………………10 5. Features of Product ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿11 5.1. GL10-M1NC1-T ………………………………………………………………………………………11 5.2. GL10-M1N-T ……………………………………………………………………………………………11 6. Product Functions ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿12 6.1. GL10-M1NC1-T ………………………………………………………………………………………12... - Page 3 Flashing Beacon 9.5.2.3. Data (Inspection control): Byte 1 = 2 … ………………………………………………………… 27 9.5.2.4. Data (Soft reset): Byte 1 = 3 …………………………………………………………………… 27 9.5.3. Indication status (Product -> Host) ………………………………………………………………… 28 9.5.3.1. Data … ……………………………………………………………………………………………… 28 9.6. Status LED … ……………………………………………………………………………………………29 10. Troubleshooting ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿30 10.1. GL10-M1NC1-T ………………………………………………………………………………………30 10.2. GL10-M1N-T ……………………………………………………………………………………………31 11. Specifications ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿32 11.1. GL10-M1NC1-T ………………………………………………………………………………………32 11.2. GL10-M1N-T ……………………………………………………………………………………………33...
-
Page 4: Before You Begin
1.Before You Begin Flashing Beacon 1. Before You Begin 1.1. About Safety Symbols To prevent injuries to the user and other personnel, as well as to prevent damage to assets, note the following. ● The following symbols classify warnings and cautions, and describe the level of harm and damage that will occur when the corresponding instructions are ignored. -
Page 5: Safety Precautions
1.Before You Begin Flashing Beacon 1.2. Safety Precautions WARNING ● Its lifespan varies greatly depending on the frequency and environment of use, but refrain from using it for more than 10 years. Deterioration of the electrical components or circuit boards, their poor insulation or contact may cause safety problems like fuming, ignition or electric shock. - Page 6 1.Before You Begin Flashing Beacon Note ● Wipe off any dirt on the product body with a soft cloth dampened with water (do not use thinner, benzine, gasoline, oil, etc.).
-
Page 7: Model Number Configuration
2.Model Number Configuration Flashing Beacon 2. Model Number Configuration Model Control spec. GL10 - M1N ↓ Model Number CAN communication (J1939) (Blank) Voltage application control... -
Page 8: Package Contents
3.Package Contents Flashing Beacon 3. Package Contents Accessories Main Unit: ×1 Instruction manual: ×1 Flat washer Spring washer Size nominal dia. 8 Size nominal dia. 8 Size Matl. stainless steel Matl. stainless steel Matl. stainless steel *Depending on the model, the end of the wiring harness differs. For details, refer to “4. -
Page 9: Names And Dimensions
4.Names and Dimensions Flashing Beacon 4. Names and Dimensions 4.1. GL10-M1NC1-T Front View Side View Top cover Globe Nameplate (back) Base Waterproof connector* Wiring harness (25) Waterproof cable gland (350) Mfr. TE Connectivity Bottom View DEUTSCH connector Model no. DT04-4P-CE02 Nameplate M8 bolt x 4 Product front... -
Page 10: Gl10-M1N-T
4.Names and Dimensions Flashing Beacon 4.2. GL10-M1N-T Front View Side View Top cover Globe Nameplate (Back) Base Leads* Wiring harness (25) Waterproof cable gland (350) Wire type IVSSH Bottom View Size 0.5 f Nameplate M8 bolt x 4 Product front (Unit: mm) -
Page 11: Features Of Product ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿11
5.Features of Product Flashing Beacon 5. Features of Product 5.1. GL10-M1NC1-T Resistance to environment ・IP Rating: IP6X, IPX6, IPX9K Light emission ・Operating temperature range: -40 to +85°C Capability to combine luminous color and flash pattern ・Number of flash patterns: 13 Power supply ・Number of luminous color: 3 Ready for multiple power input... -
Page 12: Product Functions ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿12
6.Product Functions Flashing Beacon 6. Product Functions This chapter describes the functions of the product. 6.1. GL10-M1NC1-T • The product conforms to the SAE J1939 protocol. • The can control light emission and obtain its status by using the SAE J1939 protocol. 6.1.1. - Page 13 6.Product Functions Flashing Beacon ● Double flash (High speed) (Number of flashes: 125 flashes per minute) 1 cycle: 480 ms ● Double flash (Medium speed) (Number of flashes: 63 flashes per minute) 1 cycle: 480 ms 1 cycle: 480 ms 1 cycle: 960 ms 1 cycle: 960 ms ●...
- Page 14 6.Product Functions Flashing Beacon ● Single flash (Low speed) (Number of flashes: 31 flashes per minute) 1 cycle: 960 ms 1 cycle: 1,920 ms ● Slow flash (High speed) (Number of flashes: 125 flashes per minute) 1 cycle: 480 ms ●...
-
Page 15: Selecting The Luminous Color
6.Product Functions Flashing Beacon 6.1.2. Selecting the luminous color The product allows you to select the luminous color from three colors (red, amber, green). 6.1.3. Selecting a dimming level The product allows you to select a dimming level from four types. Brightness Dimming level (approximate) -
Page 16: Gl10-M1N-T
6.Product Functions Flashing Beacon 6.2. GL10-M1N-T 6.2.1. Selecting luminous color/flash pattern • For "GL10-M1N-T," 3 colors of light are emitted from the product. • Each color has an assigned flash pattern. • The following table shows the flash patterns and flashing rate for each color. Luminous color Flash pattern Flashing rate... -
Page 17: Mounting Method ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿17
7.Mounting Method Flashing Beacon 7. Mounting Method The product has two models, but their mounting method is the same. Read the following carefully before mounting. WARNING Before installation, wiring or repairs of the product, be sure to disconnect the power (such as removing the ⊖... -
Page 18: Wiring Method ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿18
• The example of basic wiring is shown. For questions about other methods of use, please contact your nearest PATLITE sales representative listed at the end of this manual. CAUTION Be very careful not to make a wiring error. Improper wiring will cause burn damage to the internal circuits. -
Page 19: Gl10-M1N-T
8.Wiring Method Flashing Beacon 8.2. GL10-M1N-T 8.2.1. Wiring Example Power input line (Red) Fuse Power input line (Amber) Power input line (Green) ⊖ ⊕ Earth wire Power supply 12 – 24VDC ● Fuse Rating ● List of leads and functions Lead color Function Power input line (Red) -
Page 20: Communication Specifications ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿20
9.Communication Specifications Flashing Beacon 9. Communication Specifications This chapter describes the communication specifications of GL10-M1NC1-T. • The product conforms to the SAE J1939 protocol. • SAE J1939 is a protocol that uses CAN in the physical layer, mainly being used in vehicles for construction machinery. -
Page 21: Device Name
9.Communication Specifications Flashing Beacon 9.3. Device Name ● List of device names Byte Parameter Value Arbitrary Address Capable Industry Group Vehicle System Instance Vehicle System (Reserved) Function Function Instance ECU Instance Manufacture Code 1321 Identify Number See table below ● Composition of Identify Number •... -
Page 22: Parameter Groups
9.Communication Specifications Flashing Beacon 9.5. Parameter Groups • The product has its own parameter groups as shown in the table below. • You can control the product by using these parameter groups. Parameter group Control Reference ☞ 9.5.1. Change of address name (Host - > Product) PGN=65383 Change of address name (Host - >... -
Page 23: Data
9.Communication Specifications Flashing Beacon 9.5.1.1. Data bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 Byte 1 Source address setting Byte 2 Device name setting Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 ● Source address setting (Default: 183) • 128–247: The source address is changed to the set value. The new value is retained in the product even after power shutdown. -
Page 24: Control Of Light Emission (Host -> Product)
9.Communication Specifications Flashing Beacon 9.5.2. Control of light emission (Host - > Product) • This parameter group can be set or controlled as shown in the table below. • In this parameter group, the control item changes depending on the value of [Byte 1]. N a m e Description Reference... -
Page 25: Data (Operation Setting): Byte 1 = 0
9.Communication Specifications Flashing Beacon 9.5.2.1. Data (Operation setting): Byte 1 = 0 You can set dimming and turning off upon timeout. bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 Byte 1 Turning off Byte 2 upon timeout setting Byte 3 Dimming setting Byte 4 Byte 5 Byte 6 Byte 7 Byte 8... -
Page 26: Data (Operation Control): Byte 1 = 1
9.Communication Specifications Flashing Beacon 9.5.2.2. Data (operation control): Byte 1 = 1 You can control the operation of the product. bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 Byte 1 Single Byte 2 Flash pattern Luminous color operation Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 ●Flash patterns... -
Page 27: Data (Inspection Control): Byte 1 = 2
9.Communication Specifications Flashing Beacon 9.5.2.3. Data (Inspection control): Byte 1 = 2 You can perform a self test of the product. bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 ● Inspection operation •... -
Page 28: Indication Status (Product -> Host)
9.Communication Specifications Flashing Beacon 9.5.3. Indication status (Product - > Host) This parameter group is used to obtain the status of the product. ● Parameter Group Transmission Repetition Rate As required Data Length Priority Extended Data Page Data Page PDU Format PDU Specific Parameter Group Number 65384... -
Page 29: Status Led
9.Communication Specifications Flashing Beacon ● Flash patterns • 0: light is OFF. • 1: light is always ON. • 4: main body is emitting light in single flash pattern (low speed). • 5: main body is emitting light in double flash pattern (low speed). •... -
Page 30: Troubleshooting ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿30
10.Troubleshooting Flashing Beacon 10. Troubleshooting 10.1. GL10-M1NC1-T When a problem occurs, take appropriate action based on the information in the table below. Trouble Point to be checked Action Check wires for correct connection. Is wiring correct? In particular, connect CAN-L and CAN-H wires to their correct destinations. -
Page 31: Gl10-M1N-T
10.Troubleshooting Flashing Beacon 10.2. GL10-M1N-T When a problem occurs, take appropriate action based on the information in the table below. Trouble Point to be checked Action Refer to “8. Wiring Method ( ☞ Page 18)” and perform Is wiring correct? wiring again. -
Page 32: Specifications ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿32
11.Specifications Flashing Beacon 11. Specifications 11.1. GL10-M1NC1-T Model GL10-M1NC1-T Rated Voltage 12 - 24VDC Operating Voltage Range 10 - 32VDC Typ. 0.32A (Red, Triple flash, High speed) 12 V DC Max. 1.0 A Rated Current Consumption Typ. 0.17A (Red, Triple flash, High speed) 24 V DC Max. -
Page 33: Gl10-M1N-T
11.Specifications Flashing Beacon 11.2. GL10-M1N-T Model GL10-M1N-T Rated Voltage 12 - 24VDC Operating Voltage Range 10 - 32VDC Typ. 0.32A (Red, Triple flash, High speed) 12 V DC Max. 1.0 A Rated Current Consumption Typ. 0.17A (Red, Triple flash, High speed) 24 V DC Max. - Page 34 • PATLITE, the PATLITE logo are either registered trademarks or trademarks of PATLITE Corporation in JAPAN and/or other countries. • The names of other companies and products are trademarks or registered trademarks of their respective companies.
Need help?
Do you have a question about the GL10 Series and is the answer not in the manual?
Questions and answers