Adexa HEP-12 Instruction Manual page 9

Instruction Manual
Adjust the chain tension by repositioning the fastening screw in the waist hole of the
-
back box body. (These adjustments are pre-set at the factory but may require
re-adjustment after a period of use.)
Starting Operation:
• After installation, ensure the oven is ready for operation.
• Press the mains switch (center position) to the "I" position to supply power to the unit
and activate the fan.
• Turn the upper and lower temperature controllers to start the heating elements.
• Use the adjustable potentiometer to control the heating tube power output, maintaining
oven temperatures up to 300°C.
Automatic Heating: The heating elements will turn off automatically when the set
temperature is reached and reinitiate when the temperature drops below the preset value.
Conveyor Operation:
• Adjust the conveyor speed using the rotary velocity adjustment switch. The motor can
be adjusted within:
0–12 rpm for HX-1 models.
-
- 0–14.5 rpm for HX-2 models.
• Place pizza or other food on the entry side of the conveyor. The conveyor will transport
the food through the oven for toasting, and the finished food will exit on the opposite
side.
Ending Operation:
• Turn the upper and lower temperature controllers to their starting positions.
• Turn off the velocity adjustment motor switch and return the conveyor speed to its
original position.
• Turn off the power switch in the middle and disconnect the unit from the power supply.
By following these steps, the conveyor oven can be used efficiently and safely for optimal
results.
6. Transportation, Cleaning, and Maintenance
6.1 Transportation
• During transportation, handle the appliance with care to avoid intense shaking or
impacts.
• The appliance, while packaged, should be stored in a well-ventilated area that is free of
caustic air.
• Do not place the appliance outdoors or upside down.
• Keep the appliance in a dry and dust-free environment, away from direct sunlight.
• Avoid mechanical shocks and vibrations during transportation or storage.
• For temporary storage, ensure appropriate weatherproofing methods are used to
protect the appliance.
6.2 Safety Advice
• Before starting repairs or cleaning, ensure the unit is disconnected from the power
source by unplugging it.
9