Adexa HEP-12 Instruction Manual page 10

Instruction Manual
• Allow the unit to cool down completely before any maintenance.
• Avoid using acidic or abrasive detergents, and ensure no water enters the internal
components of the unit.
• To prevent electric shock, never immerse the appliance, power cord, or plug in water or
other liquids.
CAUTION: The appliance is not jet-proof. Do not use pressure water jets for cleaning.
6.3 Cleaning
• The appliance must be cleaned regularly to maintain optimal performance.
• Disconnect the power plug before cleaning and ensure it does not touch hot or wet
surfaces.
• Allow the appliance to cool completely before cleaning.
Cleaning Guidelines:
• Do not allow water to touch the control panel or enter the unit's internal parts.
• Wipe the control panel, external surfaces, and power cord with a soft cloth dampened
with a mild cleaning solution.
• CAUTION: Do not use water to clean the control panel. Water ingress may cause
dangerous creepage current and appliance malfunctions.
• Avoid aggressive cleaning agents or abrasive materials that could damage the stainless
steel protective coating or leave iron particles on the surface, which may cause rust.
• After cleaning, thoroughly dry all parts before reassembling the unit.
• Store the device in a dry, ventilated area, away from acid fumes or caustic gases, if left
idle for extended periods.
6.4 Safety Instructions for Maintenance
• Regular Inspections:
Inspect the power cord periodically for signs of damage or wear.
-
Do not operate the appliance if the power cord is damaged.
-
- If damage to the power cord is observed, call a qualified electrician for replacement.
Use only the manufacturer-designated type of power cord to avoid damaging the
appliance.
• Maintenance and repairs should only be conducted by qualified electricians or
personnel authorized by the manufacturer.
• Use only manufacturer-approved replacement parts to ensure the appliance's safety
and functionality.
• WARNING: Never attempt to repair the appliance yourself. Improper repair can lead to
serious hazards and compromise the unit's safety.
• By adhering to these guidelines, you ensure safe operation and extend the lifespan of
your appliance.
7. Waste Disposal
7.1 Discarding Old Devices
• At the end of its service life, the discarded device must be disposed of in accordance
10