ARB 17940050 Manual

Part Number(s):
17940050
Product Description:
REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG;
When installed in accordance with these instructions, the cab rack does not affect operation of the SRS
curtain airbags.
ALSO, NOTE THE FOLLOWING:
 This product must be installed exactly as per these instructions using only the hardware
supplied.
 In the event of damage to any cab rack component, contact your nearest authorised ARB
stockist. Repairs or modifications must not be attempted.
 Do not use this product for any vehicle make or model, other than those specified by ARB.
 Do not remove labels.
 This product or its fixing must not be modified in any way.
 The installation of this product may require the use of specialized tools and/or techniques
 It is recommended that this product is only installed by trained personnel
 These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held
responsible for the impact of any changes subsequently made by the vehicle manufacturer
 During installation, it is the duty of the installer to check correct operation/clearances of all
components
 Work safely at all times

Unless otherwise instructed, tighten fasteners to specified torque
ARB 4x4 ACCESSORIES
42-44 Garden St
Kilsyth, Victoria
AUSTRALIA 3137
Australian enquiries
North & South American enquiries
Other international enquiries
Last Rev Date: 08/06/2020
Copyright © 2020 by ARB Corporation Limited. All rights reserved; this document must not be reproduced without the express authority of ARB Corporation Ltd
Suits BASE RACK:
1770060/70
BASE RACK fitting kit suits:
• US Ford Ranger 2019 on
WARNING
Corporate Head Office
Tel:
Fax:
www.arb.com.au
Page 1 of 18
+61 (3) 9761 6622
+61 (3) 9761 6807
sales@arb.com.au
sales@arbusa.com
exports@arb.com.au
Fitting instructions# 37800060