Assembling The Vacuum Cleaner; Before Starting; Getting The Best Results - VOLTA Campus U4700 Instruction Manual

BEFORE STARTING

1. Open the dust bag cover.
2. Check that the dust bag is in place.
3. Insert the hose until the catch clicks to engage.
Press the catch to disengage for removal.
4. Attach the extension tube to the hose handle
and the floor nozzle.
5. Pull out the cable and plug it in. Press the
pedal to rewind the cable (take hold of the plug
to prevent it striking you).
6. Press the On/Off control with your hand to start
the vacuum cleaner.

ASSEMBLING THE VACUUM CLEANER

7. Adjust the suction power using the linear
potentiometer button on the vacuum cleaner or
the suction control on the hose handle.

GETTING THE BEST RESULTS

Hard Floors: Use the dual purpose floor nozzle with
the left pedal as shown.
Carpets: Use the dual purpose floor nozzle with the
left pedal as shown. Reduce suction power for rugs
and fabrics.
For the perfect care of your carpets:
Use the turbo nozzle. The rotary motion of its brush
gently loosens short pile carpets where the dirt has
been trodden in. It removes stubborn fluff and pet
hairs.
Loose rugs/curtains/light weight fabrics:
Reduce the suction power. Use the floor nozzle for
loose rugs and the upholstery nozzle for curtains,
cushions etc.
Confined areas : Use the crevice nozzle for crevices,
corners and radiators.
Dusting brush - Use for removal of dust coverage
on furniture and slatted blinds.
3.