PARTS IDENTIFICATION
Parts and Accessories
6*
7
8
9*
10
11
12*
Line drawings are solely for illustration purposes and may vary from actual product.
Line drawings are solely for illustration purposes and may vary from actual product.
2
1
3
5
4
1. Handle
2. On/Off Switch
3. Cord Winder
4. Wheel
5. Dust Cup
6. Remote Control*
7. Flexible Hose
8. Extension Tube
(Not applicable for models with telescopic tubes)
9. Telescopic Tube*
10. Floor Nozzle
11. Hard Floor Nozzle*
12. Combined Crevice and Brush
Nozzle and Upholstery Nozzle
*Certain models only
2
ASSEMBLING THE VACUUM CLEANER
Quick Guide
BEFORE STARTING
•
On first removing the product from its
packaging, check for any damages.
•
Check that the dust container and
the filters are in place. Never operate
the cleaner without the dust
container installed.
•
Always remove the plug from the
power supply before fitting or
removing any accessories.
ASSEMBLING THE
VACUUM CLEANER
Fitting or removing the flexible hose
•
Insert the hose until the catch
clicks to engage (press the catch to
release the hose.)
Fitting extension tubes and
accessories
Extension Tube
Floor Nozzle
•
Attach the extension tubes or
telescopic tube (only on certain
models) to the hose handle.
•
Fit the extension tube to the
floor noozle.
3