Assembling The Vacuum Cleaner - VOLTA Mega Gen 3 U5010 Instruction Manual

PRECAUTIONARY MEASURES
If the suction air flow is blocked, you should switch
off the vacuum cleaner at once. First clear the
blockage from the hose and/or telescopic extension
tube before you attempt to start the vacuum
cleaner again.
1. Do not operate the vacuum cleaner too close
to heaters and like radiators, cigarette butts etc.
2. Before you insert the plug into the power socket,
make sure your hands are dry.
3. Before you start using the vacuum cleaner, please
remove large or sharp objects from the floor
in order to prevent the paper bag to be damaged.
4. When you want to pull the plug from socket,
please do this at the plug itself and not by
the means of the electrical cable.
This vacuum cleaner is equipped with a cable and
plug, which rolls up on activation of the rewind
pedal. If the plug or cable is damaged, the plug and
cable assembly must be replaced by returning the
product to your local authorised Electrolux Service
Provider in order to avoid a hazard.
35127 ULTIMA & MEGA IFU_V5.indd 4

ASSEMBLING THE VACUUM CLEANER

ASSEMBLING VACUUM CLEANER
Always remove the plug from the power socket
before fitting or removing accessories!
Connecting vacuum cleaner
Fit or removing the flexible hose
Insert flexible hose into the air intake duct on the
top of appliance. Press until it clicks into position.
Remove the plug form the power socket. To release
the flexible hose, press firmly the two release
buttons on the hose sleeve and remove the hose
from the air intake duct.
Fitting the telescopic extension tube
and accessories
Fit the telescopic extension tube to the bent end
handle.
Fit the floor nozzle to the telescopic
extension tube.
Floor nozzles
Combination Floor Nozzle
Ideal for the daily cleaning on both carpets
and hard floors.
3.
3/10/08 2:41:12 PM