Making The Vacuum Cleaner Ready For Use; Using The Nozzles - VOLTA U 416 Operating Instructions Manual

Making the Vacuum Cleaner Ready
for Use
The accessories can be connected by either
applying pressure or twisting, and disconnected
by either pulling them apart or twisting.
Connect Together the Suction Hose and
Suction Tube.
Firmly connect the suction hose handle to the
suction tube.
Connect the Suction Tubes Together
Connect the two tubes together.
Connect the Suction Hose
Insert the suction hose connector in the suction
inlet. It locks in place and can be rotated all the
way around.
Press the release button and pull out the con-
nector in order to remove the suction hose.
28
Mains Connection/Cable Rewind
The mains cable is in the cable compartment.
Pull out the cable and plug into the mains.
Unplug from the mains. Press the foot button,
the cable rewinds automatically following com-
pletion of vacuuming.

Using the Nozzles

Using the Floor Nozzle
For the daily care of carpets and hard floors. The
floor nozzle is universally suited for daily vacu-
uming of carpets and hard floor surfaces such as
parquet, tiles, linoleum, etc. without manual
change over.