Related Manuals for VOLTA U 416
Summary of Contents for VOLTA U 416
- Page 1 Bruksanvisning Käyttöohje Operating Instructions Golvdammsugare Gulvstøvsuger Støvsuger Pölynimuri Vacuum Floor Cleaner Diamant ...
-
Page 2: Unit Description
A = Carrying Handle J = Cable Retraction Button B = Button to Open the Paper Filter Compart- K = Microfilter ment L = Motor Protection Filter C = Hose Release Button M = Paper Filter D = Filter Replacement Indicator N = Handle E = Tool Rail O = Suction Hose... -
Page 3: Table Of Contents
• For this reason, please contact you dealer or EC directives: – 73/23/EWG dated 19. 02. 1973 – VOLTA customer service direct in the event of Low Voltage Directive – 89/336/EWG dated a malfunction. 03. 05. 1989 (including Amendment Directive 92/31/EWG) –... -
Page 4: Making The Vacuum Cleaner Ready For Use
Making the Vacuum Cleaner Ready for Use The accessories can be connected by either applying pressure or twisting, and disconnected by either pulling them apart or twisting. Mains Connection/Cable Rewind The mains cable is in the cable compartment. Pull out the cable and plug into the mains. Unplug from the mains. -
Page 5: Switching On
Switching On Switch On and Off You can switch the appliance on and off by pressing the On/Off button. Power Regulation: Crevice and Upholstery Nozzle Stored in the Appliance For specific cleaning requirements, two other items are included with the vacuum cleaner in an integrated accessories compartment*. -
Page 6: Maintenance And Cleaning
Maintenance and Cleaning Insert the new paper filter to the stop in the guide rails, only then can the lid be closed. If a Prior to maintenance and cleaning, ensure that paper filter is not inserted, it is not possible to the appliance is switched off and that it is close the cover. -
Page 7: What To Do, If
Carrying and Storage ... the fuse has blown The fuse may blow if you use other high power electrical appliances on the same electrical cir- cuit at the same time as the vacuum cleaner is in use. This problem may be prevented by setting the electronic power regulator to minimum before turning on the appliance and increasing the power setting after switching on.