Assembling The Vacuum Cleaner; Getting Started; Getting The Best Results - VOLTA U7440 Instruction Manual

Getting started

1. Check the dust container is in place.
2. To connect the hose into the suction inlet push it
until it clicks.
To disconnect the hose form the suction inlet,
push the button at the end of the hose.
3. Attach the telescopic tube to the hose handle
and floor nozzle by pushing and twisting
together. (Twist and pull apart to dismantle).
4. Extend the cable and connect to the mains. The
cleaner is fitted with cord rewind, ensure cord
is not twisted before use. (Press foot pedal to
rewind. Note: Please hold the plug to prevent it
striking you or the machine).
Filter indicator light: before commencing cleaning,
plug the cleaner in and turn it on (without the hose
attached to the cleaner).
If the light is on, clean the filter.
If the light is not on, attach the hose and all the
other necessary attachments and commence
cleaning. The light will flicker on and off whilst
cleaning. This is normal.

ASSEMBLING THE VACUUM CLEANER

5. Press the On/Off button to activate the cleaner.
6. By moving the variable power control, the

Getting the best results

Carpets: Use the floor nozzle with the lever in
horizontal position.
Hard Floors: Use the floor nozzle with the lever in
vertical position.
Loose rugs/curtains/light weight fabrics: Reduce
the suction power. Use the floor nozzle for loose
rugs and the upholstery nozzle for curtains,
cushions etc.
Confined areas: Use the crevice nozzle for crevices,
corners and radiators.
Dusting brush - Use for removal of dust coverage on
furniture and slatted blinds.
3.
suction power can be adjusted. Suction can
also be regulated on the hose handle by
opening/closing the aperture.