iRobot Roomba Combo j7+ Owner's Manual page 16

Cleaning the Mopping Pad
Note: You can clean your mopping pads two ways:
either by hand washing, or in a washing machine.
HAND WASHING
Thoroughly wash the pad with warm water.
MACHINE WASHING
Wash using the warm cycle, then air dry. Do not
put in dryer. Do not wash with delicates.
Emptying the Bin
1
Press bin release button to remove bin.
2
Open bin door to empty bin.
3
Place bin back in the robot.
Cleaning the Filter
1
Remove the bin. Remove the filter by
grasping both ends and pulling out.
2
Remove debris by tapping the filter
against your trash container.
3
Reinsert filter with ridged grips facing out.
Place bin back in the robot.
Important: The robot will not run if the
filter is not installed correctly. Replace
the filter every two months.
Roomba Combo j7+ Owner's Guide
EN
7