iRobot Roomba Combo j7+ Owner's Manual page 15

Troubleshooting Your Automatic Dirt Disposal
EN
Your dirt disposal will tell you if something is wrong via an LED indicator on the
front of the canister and through the iRobot Home app.
LED Indicator Common Error
Solid Red Bag full or missing
Blinking Red There is a leak or
a clog in the dock
evacuation path
This product has been equipped with a thermal protector designed to protect
against damage due to overheating. If the protector operates, the motor will stop
running. If this happens, unplug the unit, allow to cool for 30 minutes, clear any
obstructions from the evacuation port and evacuation tube, and plug the unit
back in.
6 For more information, visit global.irobot.com
How to Fix
1. Replace bag if it is full or missing.
2. Make sure the bag is securely inserted.
3. If problem persists, remove any debris
from the port on the bottom of your robot
and the dirt disposal.
1. Make sure the canister lid is pushed down
and firmly sealed. Hold the clean button
on your robot down for 2 seconds to
manually empty the bin.
2. Remove any debris from the port on the
bottom of your robot and dirt disposal.
3. Unplug the dirt disposal from the wall.
Place it on its side and inspect the debris
evacuation tube for debris. If necessary,
remove the tube to clear any debris.
Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures on the
following pages.
There are additional instructional videos in the iRobot Home App. If you notice
the robot picking up less debris from your floor, empty the bin, clean the filter and
clean the brushes.
Part Care Frequency
Mopping Pad Clean after a mopping job
Bin Wash bin as needed
Filter Clean once a week (twice a
week if you have a pet). Do
not wash.
Charging Contacts Clean every 2 weeks
Full Bin Sensor Clean every 2 weeks
Front Caster Wheel Clean every 2 weeks
Edge-Sweeping Brush and Clean once a month (twice a
Multi-Surface Brushes month if you have a pet)
Sensor, Camera Window Clean once a month
and Pad Shelf
Bags -
Blower Cover inside Once every month (remove
canister debris from blower cover)
Note: iRobot manufactures various replacement parts and assemblies. If you think you
need a replacement part, please contact iRobot Customer Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
Replacement Frequency*
After 30 washes.
Every 2 months
Every 12 months
Every 12 months
Bags should be replaced
when prompted by the LED
indicator / app