Operating Instructions - Plantronics CS10 Operating Instructions Manual

BATTERY
PRECAUTIONS
To reduce the risk of
fire or injury to persons,
read and follow these
instructions.
1
Use only the battery
pack supplied with this
product.
2
Do not dispose of battery
pack in a fire. The cells
may explode. Check with
local codes for possible
disposal instructions.
3
Do not open or mutilate
battery pack. Released
electrolyte is corrosive
and may cause damage
to eyes or skin and may
be toxic if swallowed.
4
4
Exercise care in handling
the battery pack in order
not to short the battery
contacts with conducting
materials such as rings,
bracelets,and keys. The
battery or conductor
may overheat and
cause burns.
5
Charge the battery pack
in accordance with
instructions supplied
with this unit.
6
Observe proper orienta-
tion between battery
pack and charger
contacts.
Save these instructions
OPERATING
INSTRUCTIONS
Placing a Call
With your headset in
position move the telephone
handset off its cradle.
Press the talk button on
either the remote or the base
unit. The in-use indicators
light and you will hear a
dial tone.
If you do not hear a dial
tone, move the configuration
switch (A/B) to the opposite
setting.
1 2 3 A B
If you still do not hear a dial
tone see the Troubleshooting
section.
Dial a co-worker. When
your party answers, speak
normally and ask how your
voice sounds.
If you do not sound loud
enough, move the transmit
level switch (located on
the back side of base) to
position 1.
1 2 3 A B
If you sound too loud, move
transmit level switch to posi-
tion 3. You can further fine-
tune the transmit level with
the talk volume control locat-
ed on side of the base.
Adjust the volume of your
co-worker's voice by using
the listen volume control on
the remote.
Replace the handset upon
completion of the call and
press the talk button on either
the remote or the base. The
in-use indicator lights will
go out.
5