Plantronics Explorer 220 Series - Bluetooth Headset Manual

PACKAGE CONTENTS & FEATURES

CHARGING

Before using, you must first charge your headset.
20 minutes = minimum charge
2 hours = full charge
Light is solid red when battery is charging.

NOTE For the best user experience, keep your headset fully charged.

Do not use headset while charging and do not connect the charger while the headset is in use.

POWERING

Press the control button for 2 seconds to power on. Press the control button for 3 seconds to power off.

PAIRING

This headset comes with QuickPair^TM technology so pairing with your Bluetooth phone is even easier. Follow the instructions below to pair your phone with your headset for the first time.

QUICKPAIR FEATURE INSTRUCTIONS

1. Prepare Phone— Turn on Bluetooth
   For most phones, go to Settings/Tools menu and select Bluetooth or Connectivity and select "On." (Or see the user guide for your phone.)
   
2. Prepare Headset— Pairing Mode
   Begin with headset turned off. Turn headset on (hold call control button for four seconds until the light flashes blue) and it will automatically go into pairing mode, flashing red and blue.
   
3. Pairing— Add Headset to Phone
   For most phones, go to Settings/Tools > Bluetooth > Search or Add a Device, then Select "220Plantronics."
   For passkey enter 0000. Headset will flash blue when paired successfully. It is now powered on and ready to use.
   

NOTE: Normally you only need to pair the headset and handset once. If headset has been previously paired with another device, follow pairing instructions on the next page.

PAIRING

If headset has been previously paired with another device, please follow these instructions for pairing a second time. Be sure the headset is fully charged. For set up and pairing instructions with other Bluetooth devices, please consult your Bluetooth device user guide or visit www.plantronics.com/easytopair, an online, interactive pairing guide for phones and headsets.

Begin with headset turned off.

1. Press and hold down the call control button for 8 seconds until the headset status indicator begins to flash blue then red.
   The headset is now in pairing mode for the next 120 seconds.
   
2. While the headset is flashing, use the phone menu to search for Bluetooth devices and select "220Plantronics."
   
3. When prompted for a passkey, enter 0000. Headset will flash blue when paired successfully.

NOTE: The headset can pair to multiple Bluetooth devices, but will only connect to one device at a time. The headset will automatically connect to the last device to which it was connected.

ADJUSTING FIT

1. Lift ear loop.
   
2. Swivel ear loop to the right or left for right or left ear wearing.
   
3. Place ear loop behind ear.
   
4. Pivot headset to place speaker into ear.
   
5. Position speaker and align microphone with mouth.
   

USING YOUR DEVICE

ANSWERING/ENDING/MAKING CALLS

For best performance, position your mobile phone on the same side of your body as the headset.
To answer or end a call, briefly press the call control button.
To make a call, enter number on your phone, press send, and the call is automatically transferred to headset; no need to press call control button.

ADJUSTING THE VOLUME

Briefly push up or down on the volume button for incremental volume steps. You will hear two tones (high tone followed by low tone) at the volume limit.

Do not use headphones/headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more information on headsets and hearing.

ADDITIONAL FEATURES

Redialing Last Number
To activate last number redial, double press the call control button. You will hear a high tone after each double key press.

Using Voice Dialing
With the headset on, press the call control button for 2 seconds to activate the voice dialing.
NOTE To use voice activated dialing, the voice dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions.

Rejecting a Call
When receiving an incoming call, press the call control button for 2 seconds to reject the call.

Switching a Call From Phone to Headset
To switch an active call from your phone to your headset, press the call control button for 3 seconds.

Switching a Call From Headset to Phone
To switch an active call from your headset to your phone, press the call control button for 2 seconds.

INDICATOR LIGHTS

ACCESSORIES

AVAILABLE FOR PURCHASE

To order, please contact your Plantronics supplier or go to www.plantronics.com.

TROUBLESHOOTING

PRODUCT SPECIFICATIONS

*Performance may vary by device. Headset can last up to four days without charging, based on average talk time of 1.5 hours per day.

After reviewing this user guide, if you need additional assistance or have any product questions, please contact:

• Plantronics Technical Assistance Center at 866-363-BLUE (2583)
• www.plantronics.com/support

Please refer to the separate Safety Instructions booklet for important product safety information prior to installation or use of the product.

REGISTER YOUR PRODUCT ONLINE
Visit www.plantronics.com/productregistration to register your product online so we can provide you with the best possible service and technical support.

WARRANTY

• This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in the United States.
• The warranty lasts for one year from the date of purchase of the products.
• This warranty extends to you only if you are the end user with the original purchase receipt.
• We will at our option, repair or replace the products that do not conform to the warranty. We may use functionally equivalent reconditioned/ refurbished/remanufactured/pre-owned or new products or parts.
• To obtain service in the U.S., contact Plantronics at (866) 363-BLUE (2583).
• THIS IS PLANTRONICS' COMPLETE WARRANTY FOR THE PRODUCTS.
• This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. Please contact your dealer or our service center for the full details of our limited warranty, including items not covered by this limited warranty.

Documents / Resources

References

• Bluetooth Pairing Guide | Poly, formerly Plantronics & Polycom
• Health & Safety Information | Poly, formerly Plantronics & Polycom
• Poly | Video Conferencing, Conference Phones & Headsets | Poly, formerly Plantronics & Polycom
• Support | Poly, formerly Plantronics & Polycom
• Headset Warranty Service | Poly, formerly Plantronics & Polycom

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Plantronics Explorer 220 Series - Bluetooth Headset Manual