Plantronics CS10 Operating Instructions Manual page 6

Over-the-Ear
Configuration
Right Ear
Reassemble components as
shown 1 and 2.
1. Push pivot ball ring over
the headset assembly.
2. Push pin portion of the
flexible earloop through hole
in pivot ball ring. Reverse the
pin direction for left ear.
1
2
8
Note: For added stability,
press the headset cord under
the cord retainers on the ear-
loop.
Move the flexible earloop
away from the headset
assembly to allow the ear-
loop to be stretched open to
slide easily over the ear. Use
your thumb in the thumb loop
and forefingers to stretch the
earloop.
2
Once the earloop is over
your ear, push the speaker
toward your ear.
Adjust voice boom to a
position one inch from the
corner of the mouth.
Over-the-Ear
Configuration
Left Ear
Reassemble components
as shown in 1 and 2.
1. Push pivot ball ring over
the headset assembly.
2. Push pin portion of the
flexible earloop through
hole in pivot ball ring.
2
1
2
Move the flexible earloop
away from the headset
assembly to allow the ear-
loop to be stretched open to
easily slide over the ear. Use
your thumb in the thumb ring
and forefingers to stretch
the earloop.
Once the earloop is on
your ear, push the headset
assembly's ear phone
toward your ear.
Adjust voice boom to a
position one inch from the
side of the mouth.
9