Important Safety Instructions - Plantronics T10 User Manual

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock, and injury to persons, including the
following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the
product. The symbol identifies and alerts the user to the
presence of important operating and service instructions.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not locate base unit near water, for example, near a
bathtub, wash bowl, kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
5. Do not place this product on an unstable cart, stand
or table. The product may fall, causing serious damage to
the product.
6. Slots and openings in the base unit and the bottom
or back are provided for ventilation, to protect it from
overheating; these openings must not be blocked or covered. The
openings should never be blocked by placing the product in the
bed, sofa, rug or other similar surface. This product should never
be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper
ventilation is provided.
2
IMPORTANT SAFETY INSTRUCTIONS
7. This product should be operated only from the low
voltage power provided in your telephone line.
No separate power supply is required.
8. Do not allow anything to rest on the telephone
connection cord. Do not locate this product where the cord will
be abused by persons walking on it.
9. Do not overload outlets and extension cords as this
can result in the risk of fire or electric shock.
10.Never push objects of any kind into this product
through base unit slots as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
11.To reduce the risk of electric shock, do not
disassemble this product, but take it to qualified service
personnel when service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric shock when the
product is subsequently used.
3