Handset Lifter - Plantronics CS10 Operating Instructions Manual

Receiving a Call
When your telephone notifies
you of an incoming call, put
on your headset and lift the
telephone handset off its
cradle.
Press the talk button on either
the remote or the base. The
in-use indicator lights will
go on. Begin speaking.
Replace the handset upon
completion of the call and
press the talk button on either
the remote or the base. The
in-use indicator lights will
go out.
6
Securing Your
Headset
Attach the clothing clip at
about the chest level. Using
the clip keeps the weight
of the headset cable off the
headset and allows you to
move freely.
This is particularily important
when configured in the Over-
the-Ear configuration.
Optional

Handset Lifter

The lifter allows either the
remote or base unit's talk
buttons to automatically lift
or replace the telephone's
handset. See the accessories
section of this booklet.
HOW TO
RE-CONFIGURE
YOUR HEADSET
Your CS10 system comes
with the Plantronics Convert-
ible headset. This headset
allows for use in the Over-
the-Head or Over-the-Ear
configuration on the right
side or left side.
The headset is shipped in the
Over-the-Head configuration.
You can adjust for the right
ear or left ear by simply
rotating the voice boom
180 degrees.
Adjust the voice boom to
be about one inch from the
corner of your mouth.
Disassemble
for Other
Configurations
Unsnap the headband from
the headset assembly and
pull off the ear cushion
assembly as shown.
7