Page 1
PaceMate Treadmill USER MANUAL Find the Digital Manual Online Product may vary slightly from the item pictured due to model upgrades. Read all instructions carefully before using this product. Retain this owner’s manual for future reference. NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our...
Page 2
TABLE OF CONTENTS Important Safety Instructions ....... 03 II. Parts List ............05 III.
Page 3
I. IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions before using this treadmill. It is important your treadmill receives regular maintenance to prolong its useful life. Failing to regularly maintain your treadmill may void your warranty. DANGER To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to cleaning and/or service work.
Page 4
• When the treadmill is not in use for long periods, fold and store it in a clean, dry place. • If the treadmill’s electrical cable or plug is loose or worn, do not let your dog use the treadmill and have it inspected by a qualified electrician.
Page 5
II. PARTS LIST Handrail Guard Display Panel Running Belt End Cap ACCESSORIES Lock Nut and Nut Spanner and Allen Wrench Guardrail PARTS LIST |...
Page 6
III. CONTROL PANEL DISPLAY FUNCTIONS: TIME: Displays your elapsed workout time in minutes and seconds. SPEED: Displays the current speed from the minimum 1.0 KPH to the maximum 8.0 KPH. DISTANCE: Displays the accumulative distance travelled during workout. CALORIES: Displays the total calories burned during your workout. Press the button to start/stop training on different training mode immediately.
Page 7
IV. UNFOLDING/FOLDING INSTRUCTIONS 1. Unfolding the machine Treadmill supports a dog’s weight only. Human body weight is not supported. Lock Nut and Nut 2. Folding the machine Treadmill supports a dog’s weight only. Human body weight is not supported. Remove the lock nut and nut and fold down the handlebars.
Page 8
3. Installing Guardrail Bolts are pre-installed on the parts. Take the guardrail out of the package and locate the corresponding hole position of the machine. Use a Allen Wrench to secure the hex screws to the machine and tighten them. | ASSEMBLY INSTRUCTIONS...
Page 9
V. INCLINE SETTING The treadmill allows you to manually adjust the incline at the front of the treadmill. Adjust the incline before starting the machine. See diagram below. INCLINE SETTINGS |...
Page 10
VI. LUBRICATION Lubricating under the running belt will ensure superior performance and extend its life expectancy. After the first 25 hours of use (or 2-3 months) apply some lubricant, and repeat for every following 50 hours of use (or 5-8 months). How to check running belt for proper lubrication? Lift one side of the running belt and feel the top surface of the running deck.
Page 11
VII. RUNNING BELT ADJUSTMENT The running belt is pre-adjusted to the running deck at the factory, but after prolonged use it can stretch and require readjustment. To adjust the belt, turn on the main power switch of the treadmill and let the belt run at a speed of 4.0-6.0 KPH. Use the Allen Wrench provided to turn the rear roller adjustment bolts in order to centre the belt.
Page 12
VIII. CARE & MAINTENANCE WARNING: To prevent electrical shock, please turn off and unplug the treadmill before cleaning or performing routine maintenance. WARNING: Always check the wear and tear components like spring knob and running belt to prevent injury. CLEANING After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit.
Need help?
Do you have a question about the PaceMate and is the answer not in the manual?
Questions and answers