Digital Control DIGITRAK FALCON F1 User Manual page 47

STEP 6 OF 6
The transmitter records the maximum temperature that it has been exposed
to. Use the Transmitter Info screen to view this information. See the " Get
Transmitter Info" article for steps.
MAX MODE
STEP 1 OF 4
Before You Get Started
Max Mode can stabilize roll/pitch data and depth readings when drilling at
the transmitter's range limit due to extreme depth or interference, which will
vary by jobsite. Use when the roll/pitch update meter shows low signal level
or data is unstable.
The drill head must be stationary when taking readings using
Max Mode. If the drill head is moving, data readings will not be
accurate.
You will typically use Max Mode in areas where interference is
high. In areas of high interference, it will be harder to obtain
stable readings. Never rely on unstable depth or data. Max
Mode is not a substitute for prudent operator judgment.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 USER MANUAL
DCI DigiGuide 05.18.2024
47