Digital Control DIGITRAK FALCON F1 User Manual page 17

STEP 3 OF 5
Pull the trigger to turn on the locator.
STEP 4 OF 5
Click to confirm you've read the manual.
STEP 5 OF 5
Click again to continue.
TRANSMITTER SETUP
STEP 1 OF 3
Your transmitter comes with
two battery contact springs
and one battery cap tool.
STEP 2 OF 3
Insert batteries positive terminal first. If you are using C-cell batteries, install
one spring between batteries to help prevent chatter.
Alkaline batteries are not sufficient for High Power Mode. The
locator will display a warning.
Do not use a spring with a SuperCell or the Falcon Tx Adapter (FTA).
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 USER MANUAL
DCI DigiGuide 05.18.2024
17