Table of Contents
Advertisement
Carefully read p. 45 (MAINTENANCE).
The ideal slack of the accelerator control
should be about 2-3 mm.
To adjust the slack, proceed as follows:
N
Position the vehicle on the centre stand
on firm and level ground.
N
Remove the protection element (1).
N
Loosen the nut (2) (by turning it clock-
wise).
N
Act on the adjuster (3), positioned at the
beginning of the accelerator control ca-
ble.
After the adjustment:
N
Tighten the nut (2) (by turning it anti-
clockwise), thus locking the adjuster (3)
and put back the protection element (1).
WARNING
After the adjustment, make sure that the
rotation of the handlebar does not mod-
ify the engine idling rpm and that the
throttle grip returns smoothly and auto-
matically to its original position after
being released.
use and maintenance Scarabeo 50 - Scarabeo 100
65
Advertisement
Table of Contents
