Table of Contents
Advertisement
18
use and maintenance Scarabeo 50 - Scarabeo 100
NOTE
The electrical parts work only when the ignition switch
is in position " ".
NOTE
The lighting system works only when the motor is run-
ning.
1) DIMMER SWITCH (
sion)
When the light switch (
mer switch is in position "
if it is in position "
", the high beam comes on.
2) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
4) COLD START LEVER ( )
The lever for the cold start of the engine is operated by rotat-
ing the lever clockwise (outwards).
To disconnect the cold start, return the lever to its initial posi-
tion.
-
) (not provided in the
•
-
) is in position "
", if the dim-
", the low beam comes on, while
)
)
ver-
Advertisement
Table of Contents
