Table of Contents
Advertisement
INSTALLING THE BATTERY
Carefully read p. 123 (BATTERY).
◆
Make sure that the ignition switch is in
position " ".
◆
Remove the rider seat, see p. 106
(REMOVING THE RIDER SEAT).
126
use and maintenance RSV mille TUONO
N O T E
T h e b a t t e r y ( 1 ) m u s t b e
positioned in its compartment with the
terminals directed towards the rear part of
the vehicle.
◆
Put the battery (1) in its compartment.
◆
Put back the bracket (2) that locks the
battery.
◆
Screw and tighten the screw (3).
Upon reassembly, connect first the
positive cable (+) and then the negative
cable (–).
- RSV mille R TUONO
◆
Connect the positive terminal (+) by
means of the screw (4).
◆
Connect the negative terminal (–) by
means of the screw (5).
◆
Cover the terminals of the cables and of
the battery with neutral grease or
vaseline.
◆
Put back the red protection element (6).
◆
Put back the rider seat, see p. 106
(REMOVING THE RIDER SEAT).
To remove the battery it is necessary to
set to zero the digital clock and the red
line setting. To reset these functions,
s e e
p .
4 0
( M U L T I F U N C T I O N
COMPUTER).
Advertisement
Table of Contents
