Changing The Headlight Bulbs - APRILIA RSV MILLE R TUONO - 2003 Manual

Table of Contents

Advertisement

CHANGING THE HEADLIGHT
BULBS
Carefully read p. 131 (BULBS).
The headlight contains:
– two high beam bulbs (1) (side);
– one parking light bulb (2) (upper);
– one low beam bulb (3) (lower).
The high beam and the low beam bulbs are
the same.
If either of them is damaged and no spare
bulb is available, it is possible to invert
them.
This operation is intended only to make it
easier for the rider to go back home or to
reach a shop where he can buy a new
bulb, but the replacement of the damaged
bulb remains indispensable.
132
use and maintenance RSV mille TUONO
4
5
To ch an ge the b ul bs , pro ce ed as
follows:
Position the vehicle on the stand, see p.
82 (POSITIONING THE VEHICLE ON
THE STAND).
HIGH BEAM BULBS
NOTE
Extract the connectors one by
one, in such a way as to avoid positioning
them wrongly upon reassembly.
I f i t i s n e c e s s a r y t o r e m o v e a l l t h e
connectors at the same time, mark them
and make sure that you position them
correctly upon reassembly.
Remove the front fairing, see p. 109
(REMOVING THE FRONT FAIRING).
Move the protection element (4) of the
bulb to be changed with your hands.
- RSV mille R TUONO
A
6
7
To extract the bulb electric connector,
do not pull its wires.
Grasp the bulb electric connector (5),
pull it and disconnect it from the bulb.
Release the two ends of the check
spring (6) positioned on the bulb socket
(7).
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket,
making the respective positioning seats (A)
coincide.
Correctly install a new bulb of the same
type.
Upon reassembly:
NOTE
Put back the protection element
( 4 ) w i t h t h e c a b l e p a s s a g e f a c i n g
downwards.
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rsv mille tuonoRsv mille r tuono

Table of Contents