APRILIA RSV 1000 R FACTORY Manual page 23

Hide thumbs Also See for RSV 1000 R FACTORY:
Table of Contents

Advertisement

DIAGNOSTICS
1) Each time the ignition key is set to "",
efi
the wording "
" is displayed for about
three seconds.
CAUTION
efi
When the "
" wording turns on and the
warning light (
) comes on during
normal engine operation, it means that
the Engine Control Unit has detected an
anomaly.
In most cases the engine will keep
running, although with less than ideal
performance. However, contact an
aprilia
Official Dealer without delay.
ENGINE OIL PRESSURE
Each time the ignition key is set to "", the
engine oil pressure light comes on for
about three seconds.
CAUTION
If the engine oil pressure light stays on
and the warning light (
well, after engine firing or during normal
engine operation, it means that the
engine oil pressure is low.
Stop the engine imm ediately and
aprilia
contact an
Official Dealer.
SETTING THE RED LINE THRESHOLD
(WITH ENGINE OFF ONLY)
W h e n t h e m a x i m u m r p m s e t i s
exceeded, the red line warning light
(r ed) (1) on the da shboar d starts
blinking.
NOTE
) comes on as
threshold, which operates the red line light,
can only be set with the engine off and the
odometer displayed. Setting range is 2,000
- 12,000 rpm.
Factory setting is 6,000 rpm.
To view red line threshold setting, hold
down the "Trip/V" button for at least 3
seconds. The rev counter pointer (2) will
point the corresponding rpm for three
seconds.
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
1
2
The
red
line
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rsv 1000 r

Table of Contents