APRILIA RSV 1000 R FACTORY Manual page 22

6
LAP TIMER
The lap timer measures and stores lap
times while riding on the track for later
review.
W h e n t h e " L A P T I M E R " f u n c t i o n i s
selected, the "clock" cannot be displayed:
To turn on the lap timer:
Hold down "TRIP/V" for over 3 seconds
u
while holding down the "LAP" button.
The clock display area will read "
00'00"00"
.
To turn off the lap timer:
Hold down "TRIP/V" for over 3 seconds
u
while holding down the "LAP" button.
The display will return to the clock
display.
22
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
To start the lap timer
Press the "LAP" button (6) and release
u
immediately. At the first press, time
count starts.
Pressing the "LAP" button again within
10 seconds of starting the time count will
reset and restart the time count
At the next press of the "LAP" button, a
new lap time count begins. The previous
lap time is stored and displayed for 10
01 LAP
seconds along with lap number (in the
top left corner)
After these 10 seconds, lap timer display
changes to second lap timing and lap
number.
NOTE
The lap timer can store up to 40
lap times. When memory is full, pressing
the "LAP" button (6) will take no effect and
the 40 lap times stored are displayed
automatically.
The lap timer is reset by deleting the 40 lap
times stored as follows.
Access the lap timer function and hold
down the "-" button for at least 3 seconds
while holding down the LAP button (6).
When the memory is clear, the lap timer
goes back to the initial display "
00'00"00"
.
Any lap times stored will be lost when the
battery is disconnected.
How to view stored lap times:
Access the lap timer function and hold
u
down "TRIP/V" for over 3 seconds. Scroll
through lap times using buttons "+"
(scroll forward) and "-" (scroll back).
To go back to the lap timer function, hold
down "TRIP/V" for over 3 seconds.
01 LAP