APRILIA RSV 1000 R FACTORY Manual page 19

VIEWING CURRENT, MAXIMUM AND
AVERAGE SPEEDS AND BATTERY
VOLTAGE
NOTE
Average and maximum speed
and battery voltage are only displayed
when the vehicle is stopped. Only current
speed may be displayed while riding.
When the ignition key is turned to position
"", current speed appears on the display.
Press the "+" button to display maximum
speed (V max), average speed (AVS) and
battery voltage.
↓
+
Current speed
↓
+
Maximum speed
↓
+
Average speed
↓
+
Battery voltage
↓
+
To reset maximum (V max) and average
speed (AVS), select the speed indication
you wish to reset and hold down the "-"
button for at least 3 seconds.
NOTE
Maximum and average speeds
are calculated on the distance covered
since last resetting.
Battery voltage indication (expressed in
Volts) cannot be changed and provides a
measure of battery operating conditions.
The charging system is operating correctly
when battery voltage at 4000 rpm with the
low beam on is between 13 and 15 Volts.
Setting instrument
u
instrument backlighting brightness can
be set at one of three preset levels (30%,
70%, 100%). To set backlighting, press
the "-" button within 5 seconds of turning
the key to "".
↓
-
30% brightness
↓
-
70% brightness
↓
-
100% brightness
↓
-
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
backlighting:
19