Auxiliary Equipment; Glove/Tool Kit Compartment; Crash Helmet Hook - APRILIA MX 125 - ED01 2004 Manual

AUXILIARY EQUIPMENT

4

GLOVE/TOOL KIT COMPARTMENT

T h e g l o v e / t o o l k i t c o m p a r t m e n t i s
positioned under the left side cover; to
reach it:
Remove the left side cover, see pag. 58
◆
(REMOVING THE SIDE COVERS)
Turn the quick fastening screw (1) by 1/4
◆
of a turn.
Take compartment (2) out of its location.
◆
Remove the compartment lock (3) from
◆
behind.
NOTE
At reassembly, be careful to
properly fit centering pin (4).
use and maintenance MX 125
34
2 1
The tool kit (2) includes:
√ n° 1 tool case
√ n° 1 4 mm bent Allen spanner
√ n° 1 5 mm bent Allen spanner
√ n° 1 6 mm bent Allen spanner
√ n° 1 8 mm bent Allen spanner
√ n° 1 7x8mm double fork spanner
√ n° 1 10x13 mm double fork spanner
√ n° 1 19 mm fork spanner
√ n° 1 21x24 mm double socket spanner
√ n° 1 cross-/cut-headed screwdriver
√ n° 1 screwdriver handle
√ n° 1 3x70 mm cross-headed screwdriver
Max. allowed weight: 1.5 kg
2 3

CRASH HELMET HOOK

Thanks to the crash helmet hook, you no
longer have to carry the crash helmet with you
every time you park the vehicle.
Do not ride with the crash helmet
hanging from the hook, as this may
seriously compromise your safety.
To hang the crash helmet, proceed as follows:
Insert the key in the lock (5).
◆
Rotate the key clockwise.
◆
Pass the crash helmet cable through the
◆
hook (6).
Rotate the key anticlockwise.
◆
Make sure that you have correctly closed
the hook (6).
6 5
WARNING
CAUTION