WARNING
Ensure that the rear-view mirror sup-
port rod (1) is locked in such a way that
the mirrors are secure and check the
correctly adjustement of the rear-view
mirrors. Failure to heed this warning
can prevent you from seeing danger ap-
proaching from behind and lead to a se-
rious accident.
◆
Replace the boot (3).
When the rear-view mirror support rod
is aligned with the handlebar:
◆
Turn (B) the rear-view mirror (5) to its op-
timal position (C).
◆
Ensure that there are no dirt or mud de-
posits on the reflecting surfaces and on
the rear view mirrors.
130
use and maintenance ETV mille Caponord ABS
REMOVING THE REAR-VIEW MIRRORS
NOTE
The following information may re-
fer to only one rear-view mirror but is appli-
cable to both.
◆
Place the vehicle on the stand, see p. 85
(PLACING THE VEHICLE ON THE
STAND).
◆
Withdraw the boot (3).
◆
Loosen the screw (4).
◆
Grasp the support rod (1), withdraw it up-
wards, removing the entire rear-view mir-
ror unit (6) complete with the boot (3).
Repeat these operations to remove the
other rear-view mirror.
WARNING
After the reassembly correctly adjust
the rear-view mirrors, see p. 129 (AD-
JUSTMENT OF THE REAR-VIEW MIR-
RORS).
WARNING
After reassembly, correctly adjust the
rear-view mirrors, see above (ADJUST-
MENT OF THE REAR-VIEW MIRRORS)
and tighten the nuts in such a way that
the mirrors are secure. Failure to heed
this warning can prevent you from see-
ing danger approaching from behind
and lead to a serious accident.