Table of Contents
Advertisement
1
CHECKING AND TOPPING UP
WARNING
Check the coolant level and top up the
expansion tank with cold engine.
Stop the engine and wait until it has
cooled down.
Keep the vehicle in vertical position, with
the two wheels resting on the ground.
Make sure that the coolant contained in
the expansion tank (2) is included be-
tween the "FULL" and "LOW" marks, by
checking through the appropriate slot on
the right fairing".
FULL = maximum level
LOW = minimum level
2
1
FULL
FULL
LOW
LOW
If not, proceed as follows:
Unscrew and remove the filling cap (1).
The coolant is noxious: do not swallow
it; if the coolant gets in contact with the
skin or the eyes, it can cause serious ir-
ritations.
Do not use your fingers or any other ob-
ject to check if there is enough coolant.
Do not put additives or other subtances
into the fluid.
If you use a funnel or other similar
items, make sure that they are perfectly
clean.
WARNING
CAUTION
Top up the expansion tank by adding
coolan t, se e p. 11 0 (LUBRICANT
CHART), until this almost reaches the
"FULL" level. Do not exceed this level,
otherwise the fluid will flow out while the
engine is running.
Put back the filling cap (1).
CAUTION
In case of excessive consumption of
coolant and in case the tank remains
empty, make sure that there are no
leaks in the circuit. Have it repaired by
an
Official Dealer.
use and maintenance ETV mille Caponord
39
Advertisement
Table of Contents
