Table of Contents
Advertisement
3
2
1
22
use and maintenance ETV mille Caponord
4
NOTE
The electrical parts work only when the ignition switch
is in position " ".
1) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) DIMMER SWITCH (
-
When the light switch is in position "
is in position "
", the high beam comes on; while if it is in po-
sition "
", the low beam comes on.
3) DIMMER SWITCH (
-
When it is in position "
light and the low beam are always on.
When it is in position "
4) HIGH BEAM SIGNALLING PUSH BUTTON (
It makes it possible to use the high beam for signalling to
forthcoming vehicles while overtaking and in case of peril
and/or emergency.
The high beam blinking is operated by pressing the push but-
ton, independently of the position of the light switch (
•
-
).
NOTE
To disconnect the high beam blinking, release the push
button.
)
)
)
": if the dimmer switch
)
" the parking lights, the dashboard
", the high beam comes on.
)
-
Advertisement
Table of Contents
