Table of Contents
Advertisement
NOTE
The electrical parts work only when the ignition switch
is in position " ".
1) ENGINE STOP SWITCH (
WARNING
Do not operate the engine stop switch "
conditions.
This is a safety or emergency switch.
With the switch pressed in position " ", it is possible to start
the engine; when the switch is pressed to position " ", the
engine stops.
CAUTION
To stop the vehicle, use exclusively the ignition switch (A).
Leave the engine stop switch (1) in position " " and use it
only in case of emergency.
CAUTION
With stopped engine and ignition switch in position " ", the
battery may discharge.
If the engine stop switch must be used (1), immediately af-
terwards turn the ignition switch (A) to position " ".
2) LIGHT SWITCH (
-
When the light switch is in position "
the switch is in position "
board light are on; when the switch is in position "
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch.
-
)
-
" in running
•
-
) (not provided for
)
•
", the lights are off; when
", the parking lights and the dash-
3) START PUSH BUTTON ( )
When the start push button " " is pressed, the starter makes
the engine run. For the starting, see p. 48 (STARTING).
", the
1
A
2
3
use and maintenance ETV mille Caponord
23
Advertisement
Table of Contents
