Table of Contents
Advertisement
Position the vehicle on the stand, see p.
56 (POSITIONING THE VEHICLE ON
THE STAND).
Introduce the key (1) in the seat lock.
Rotate the key (1) clockwise, lift and
withdraw the seat (2) from behind.
NOTE
The glove/tool kit compartment is
positioned under the passenger seat.
To reach it, proceed as follows:
Remove the glove/tool kit compartment
cover (3).
26
use and maintenance ETV mille Caponord
To lock the seat (2), proceed as follows:
NOTE
Before lowering and locking the
seat (2), make sure that you have not left
the key in the glove/tool kit compartment.
Insert the two front couplings (4) in the
relevant seats (5).
Lower and press the passenger seat (2),
making the lock snap.
WARNING
Before leaving, make sure that the seat
(2) is properly locked.
If a larger surface for the luggage is need-
ed, when the rider travels alone the pas-
senger seat can be removed. To carry out
this operation, it is necessary to lock the
glove/tool kit compartment cover (3).
In this case:
Remove the passenger seat, see p. 26
(UNLOCKING/LOCKING THE PASSEN-
GER SEAT).
Remove the lock coupling (6) from its
seat.
Insert the lock coupling (6) and fit it cor-
rectly in the appropriate seat (7) on the
glove/tool kit compartment cover (see
figure).
Correctly position the glove/tool kit com-
partment cover (3) in its seat.
Advertisement
Table of Contents
