ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual page 974

Appendix A Log Descriptions
Table 297 DHCP Logs
LOG MESSAGE
Can't find any lease for
this client - %s, DHCP
pool full!
DHCP server offered %s
to %s(%s)
Requested %s from
%s(%s)
No applicable lease found
for DHCP request - %s !
DHCP released %s with
%s(%s)
Sending ACK to %s
DHCP server assigned %s
to %s(%s)
Table 298 E-mail Daily Report Logs
LOG MESSAGE
Email Daily Report has
been activated.
Email Daily Report has
been deactivated.
Email daily report has
been sent
successfully.
Cannot resolve mail
server address %s.
Mail server
authentication failed.
Failed to send report.
Mail From address %s1
is inconsistent with
SMTP account %s2.
Failed to connect to
mail server %s.
974
DESCRIPTION
All of the IP addresses in the DHCP pool are already assigned
to DHCP clients, so there is no IP address to give to the listed
DHCP client.
The DHCP server feature gave the listed IP address to the
computer with the listed hostname and MAC address.
The ZyWALL received a DHCP request for the specified IP
address from the computer with the listed hostname and MAC
address.
There is no matching DHCP lease for a DHCP client's request
for the specified IP address.
A DHCP client released the specified IP address. The DHCP
client's hostname and MAC address are listed.
The DHCP server feature received a DHCP client's inform
packet and is sending an ACK to the client.
The DHCP server feature assigned a client the IP address that
it requested. The DHCP client's hostname and MAC address
are listed.
DESCRIPTION
The daily e-mail report function has been turned on. The
ZyWALL will e-mail a daily report about the selected items at
the scheduled time if the required settings are configured
correctly.
The daily e-mail report function has been turned off. The
ZyWALL will not e-mail daily reports.
The ZyWALL sent a daily e-mail report mail successfully.
The (listed) SMTP address configured for the daily e-mail
report function is incorrect.
The user name or password configured for authenticating
with the e-mail server is incorrect.
The user name and password configured for authenticating
with the e-mail server are correct, but the (listed) sender e-
mail address does not match the (listed) SMTP e-mail
account.
The ZyWALL could not connect to the SMTP e-mail server
(%s). The address configured for the server may be incorrect
or there may be a problem with the ZyWALL's or the server's
network connection.
ZyWALL USG 1000 User's Guide