ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual page 893

created a cellular interface but cannot connect through it.
• Make sure you have a compatible 3G device installed or connected. See
57 on page 909
• Make sure you have the cellular interface enabled.
• Make sure the cellular interface has the correct user name, password, and PIN
code configured with the correct casing.
• If the ZyWALL has multiple WAN interfaces, make sure their IP addresses are on
different subnets.
I cannot configure a particular VLAN interface on top of an Ethernet interface even
though I have it configured it on top of another Ethernet interface.
Each VLAN interface is created on top of only one Ethernet interface.
I cannot get the auxiliary port to connect to my phone line.
You have to connect an external modem to the ZyWALL's auxiliary port to use the
auxiliary interface.
The ZyWALL is not applying an interface's configured ingress bandwidth limit.
At the time of writing, the ZyWALL does not support ingress bandwidth
management.
The ZyWALL is not applying my application patrol bandwidth management
settings.
Bandwidth management in policy routes has priority over application patrol
bandwidth management.
ZyWALL USG 1000 User's Guide
for details.
Chapter 56 Troubleshooting
Chapter
893