Antispam; Spam Summary - ZyXEL Communications VANTAGE REPORT Manual

Each field is described in the following table.
Table 126 Report > Network Attack > AntiVirus > Top Destinations > Drill-Down
LABEL
graph
Virus Blocked
Color
Occurrences
% of Occurrences
View Logs
Total
Back

7.4 AntiSpam

These reports look at spam messages that were detected by the ZyXEL device's
anti-spam feature. You can also look at the top senders and sources of spam
messages.
Note: To look at anti-spam reports, each ZyXEL device must record anti-spam
messages in its log. See the User's Guide for each ZyXEL device for more
information. In most devices, go to Logs > Log Settings, and make sure Anti-
Spam is enabled.

7.4.1 Spam Summary

Use this report to look at the number of spam messages by time interval.
Vantage Report User's Guide
DESCRIPTION
The graph displays the information in the table visually.
• Click the Pie View or the Bar View icon. You can specify the
Default Chart Type in System > General Configuration.
• Move your mouse over a slice in the pie chart or a bar in the bar
chart to display its identification.
• Click on a slice in the pie chart to move it away from the pie chart
a little.
This field displays the top viruses stopped from going to the selected
destination, sorted by the number of occurrences by each one.
This field displays what color represents each virus in the graph.
This field displays the number of times each virus was sent to the
selected destination.
This field displays what percentage each virus made of the viruses
sent to the selected destination.
Click this icon to see the logs that go with the record.
This entry displays the totals for the viruses above. If the number of
viruses sent to the selected destination is greater than the maximum
number of records displayed in this table, this total might be a little
lower than the total in the main report.
Click this to return to the main report.
Chapter 7 Network Attack
305