ZyXEL Communications VANTAGE REPORT Manual page 394

Chapter 11 Schedule Report
Table 164 Report > Schedule Report > Summary > Add (Overtime Report)
LABEL
E-mail Subject
E-mail Body
E-mail Attached
Files
Apply Template
Save Directory
Start Date
End Date
Start Time
End Time
Report List
Apply
Reset
Cancel
394
DESCRIPTION
Enter the subject line in the e-mail message Vantage Report sends.
The subject must be 1-50 printable ASCII characters.
Vantage Report provides an auto-complete feature in this field. As
you type, you can see a list of values for this field in other scheduled
reports next to the mouse. You can click on one to avoid typing the
rest of the value.
Enter the text you want to appear in the main body of the e-mail
message Vantage Report sends. The body must be 1-255 printable
ASCII characters long.
Select this if you want Vantage Report to send the selected report(s)
as attachment(s). Vantage Report also saves the selected report(s)
on the Vantage Report server. If you do not select this, Vantage
Report only saves the selected report(s) on the Vantage Report
server. These report(s) are stored in
Vantage Report installation directory.
Select the check box and a template if you want to use a customized
report format.
This field is read-only. Vantage Report saves a copy of the selected
report(s) on the Vantage Report server. This field displays where the
copy is.
Select the day to start collecting information for the selected
report(s).
Select the day to stop collecting information for the selected
report(s).
Select the hour to start collecting information for the selected
report(s). Vantage Report starts collecting information at the
beginning of this hour.
Select the hour to stop collecting information for the selected
report(s). Vantage Report stops collecting information at the end of
this hour and generates the report. Vantage Report sends the report
after it finishes generating it. The report generation time depends on
the amount of information in the report. Having Vantage Report
generate too many reports at the same time can affect performance.
Select which report(s) you want to generate and send in the e-mail
message. For some reports, you can select additional options. All the
bandwidth reports use the same direction setting.
Use the Select All check box at the bottom to select every report.
Refer to Figure 174 on page 386
Click this to save your settings and close the screen.
Click this to change the settings in this screen to the last-saved
values.
Click this to close the screen without saving any changes.
in the
data\scheduler
for the full view of Report List.
Vantage Report User's Guide