Related Manuals for ATD Tools ATD-8400
Summary of Contents for ATD Tools ATD-8400
- Page 1 ATD-8400 BENCH TOP BLAST CABINET OWNER’S MANUAL Features: Made in China to ATD Tools, Inc. Specifications Visit us at www.atdtools.com ATD8400_rev_1124...
- Page 2 Thank you for purchasing the ATD-8400 Bench Top Blast Cabinet, designed for professional workshop use. e stron l recommend that this unit used with a vacuum e traction device. Air is tracted via a filtration from the openi at the ri ht hand side of...
- Page 3 The unit is shipped comp asse led, e cept for the air vent filter, the un and its attached hoses. These should connected as foll remove the (1) and all the various components from within the ca The end of the air inlet hose, connected to the un, is inserted throu h the mm dia.
- Page 4 all , connect the air supp to the e tended nut shown in Use the PTFE tape supplied to ensure an airtight seal. FIG. 4 The air supp should e and cap of deliverin a minimum of 1 OPERATION Plu the AC power adapter into the wall outlet and switch the power (Switch the lamp pushi “I”, switch...
- Page 5 NOTES: There are no hard or fast rules overni es and air pressures used with different sives. ith e perience tation ou will u learn the ations for the re red result. more delicate parts, start with minimal air pressure to avoid unnecessar pitti cessive a rasion, and w up to a setti...
- Page 6 MAINTENANCE efore use, che that all parts are servicea le, includin the air inlet hose, loves and sive -up. Be sure that the air vent foam filter is in place. The swivel clamps, securin the lid, must secure so as not to allow the lid to open duri operation.
- Page 7 TROUBLESHOOTING PROBLEM CAUSE REMEDY E cessive dust in Air vent or airflow is loc ed Clean rear vent, and A rasive media worn vent awa from an wall Too much a rasive media in eplace a rasive media the ca inet emove e cessive media se air line or fittin T hten fitt...
- Page 8 ATD-8400 *PRT8400-20 DETAIL 34 33 28 32 30 31...
- Page 9 ITEM# ORDERING PART# PART DESCRIPTION P T8400-01 G ID P T8400-02-0 IG T ASSY (BU B, I ING, P ASTIC END C VE , E ECT P T8400-0 CAB E G AND ASSEMB Y P T8400-0 AC P E ADAPTE P T8400-08 MAIN I TE P T8400-0...
- Page 10 WARRANTY 1 YEAR LIMITED WARRANTY THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES _______________________________________ ________________________________________ Some states’ laws do not allow limited durations on certain implied warranties and some states’ laws do not allow limitations on...
Need help?
Do you have a question about the ATD-8400 and is the answer not in the manual?
Questions and answers
Do you have P/N PRT8400-07
P/N PRT8400-07 is not listed in the provided parts list for the ATD Tools ATD-8400. Therefore, compatibility cannot be confirmed.
This answer is automatically generated