Table of Contents
Advertisement
Quick Links
ATD-7454 and ATD-7455
Hydraulic Shop Press with Bottle Jack
ATD-7454 - 20-Ton Capacity
Features:
universal joints, pulleys, wrist pins and other various
Heavy steel, welded construction
The safety alert symbol is used to alert you to potential personal injury hazards. Obey all
!
safety messages that follow this symbol to avoid possible injury or property damage.
Read this manual and follow all Safety Rules and Operating Instructions before using this product.
Owner's Manual
ATD-7455 - 25-Ton Capacity
Made in China to ATD Tools, Inc. Specifications
Visit us at www.atdtools.com
ATD7454_ATD7455_rev_0419
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ATD Tools ATD-7454
Summary of Contents for ATD Tools ATD-7454
- Page 1 Read this manual and follow all Safety Rules and Operating Instructions before using this product. Made in China to ATD Tools, Inc. Specifications ATD7454_ATD7455_rev_0419 Visit us at www.atdtools.com...
-
Page 2: Safety And General Information
SPECIFICATIONS Max. Working Min. Working Model Capacity Press Size ( L X W X H ) Space Space 20 Ton 25 Ton 28" x 28" x 59" Saddle Handle Sleeve Bed Frame Release Valve (ATD-7454 shown) - Page 3 Ensure the oil level that the pump operates smoothly and that the extension screw will thread easily ATD Tools authorized replacement parts only. Bleeding / Venting Trapped Air handle into the handle sleeve; then pump 6 to 8 full...
- Page 4 Size of Hardware Kits Assembly Bolt M10x25 Model ATD-7454: (Refer to Figure 2) Note: 1. Attach (1) to channels (2) with washers and nuts (3). Hand Bolt M16x150 only. 2. Attach lower cross (4) to channels (3). 3. Attach support...
- Page 5 Hydraulic Couplers (1/4" NPT) Hydraulic Hose Release Valve Bed Frame Oil Filler Screw (ATD-7455 shown) Assembly Model ATD-7455: (Refer to Figure 4) Note: and nuts (10). 7. Thread the ram (1 9. Tighten all aplicable nuts and bolt assemblies. 12. Connect the male coupler end of hydraulic hose (15) to the female coupler of the ram (11) to complete the connections.
-
Page 6: Operation
WARNING Study, understand, and follow Always Do not exceed rated capacity. safety shield is installed potential hazards associated with its use. Failure result in personal injury and/or property damage. OPERATION Projectile Hazard! Wear ANSI approved eye protection. Never stand directly in front of loaded press. fully following all operating instructions. -
Page 7: Maintenance
MAINTENANCE Before each use, inspect press for Do not use if or otherwise Adding/Changing oil to bottle jack ATD-7454: Important: 2. With ram fully lowered and pump piston fully depressed, set jac Note ATD-7455: 1. Depressurize and disconnect hydraulic hose from application. - Page 8 REPLACEMENT PARTS: Replacement Parts illustration for model ATD-7454 Item Ordering Part# Description B20Y Bead Frame Adapter...
- Page 9 Replacement Parts illustration for model ATD-7455 Item Part # Description Item Part # Description Coupler, Female (pair) Bed Frame Coupler, Male 55255 (#11 & 15) Oil Filler Screw 19 20...
-
Page 10: Troubleshooting
TROUBLESHOOTING Symptom Possible Causes Corrective Action Ram will not press load Remedy overload condition Contact ATD Tools Tech. Service Air trapped in system With ram fully retracted, remove oil Ram will not extend to full extension... - Page 11 PREVENTATIVE MAINTENANCE RECORD LOG DATE MAINTENANCE PERFORMED...
-
Page 12: Year Limited Warranty
WARRANTY 1 YEAR LIMITED WARRANTY THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES _______________________________________ ________________________________________ RECE one year from your date of purchase of this product.
Need help?
Do you have a question about the ATD-7454 and is the answer not in the manual?
Questions and answers