Figure 26 Advanced: Inbound Filter; Table 25 Advanced: Inbound Filter - ZyXEL Communications P-336M User Manual

Figure 26 Advanced: Inbound Filter

The following table describes the labels in this screen.

Table 25 Advanced: Inbound Filter

LABEL
Add Inbound Filter
Rule
Name
Action
Source IP Range
Enable
Source IP Start
Source IP End
Save
Clear
Inbound Filter
Rules List
Name
Chapter 4 Advanced
DESCRIPTION
Enter a descriptive name (up to 16 characters) for this filter setting. This is for
identification purposes only.
Select Deny to block packets from the specified IP address(es).
Select Allow to forward packets from the specified IP address(es).
Select this option to activate the filter action on the specified IP address range.
Clear this check box to disable the filter action on the IP address range.
Enter the start of the source IP address range.
Enter the end of the source IP address range.
Click Save to save the settings in this part of the screen.
Click Clear to start configuring this part of the screen again.
This field displays the name of the inbound filter.
ZyXEL P-336M User's Guide
60