Configuration Backup - ZyXEL Communications P-336M User Manual

Table 28 Tools: Admin
LABEL
Gateway Name
Enable Remote
Management
Remote Admin
Port
Remote Admin
Inbound Filter
Admin Idle
Timeout
UPNP
Enable UPNP
Save and Restore
Configuration
Restore
Configuration
From File
Save
Configuration
Cancel

5.1.4 Configuration Backup

Note: Do not turn off the P-336M while the file transfer process is taking place.
Follow the steps below to back up the current configuration of the P-336M.
1 In the web configurator, click Tools > Admin (see
2 Scroll to the bottom of the ADMIN screen and click Save Configuration.
3 A File Download screen displays. Click Save.
Chapter 5 Tools
DESCRIPTION
Enter a descriptive name (up to 32 characters) for your P-336M. This is for
identification purposes only.
Remote management allows you to allow access to the P-336M web configurator
from the WAN.
Select this option to activate this feature.
Clear this check box to disable this feature.
Specify the port number of the embedded web server on the P-336M for accessing
the web configurator.
Enter a port number to access the web configurator. If you enter a number other
than 80, you need to append the port number to the WAN port IP address to
access the web configurator. For example, if you enter "8080" as the web server
port number, then you must enter "http://10.10.1.1:8080" where 10.10.1.1 is the
WAN port IP address.
Select a filter action on the traffic. Select You can configure filter actions in the
Inbound Filter screen.
Specify how many minutes the web configuration can be left idle before the
session times out. After it times out you have to log in with your username and
password again. Very long idle timeouts may have security risks.
Select this option to activate this feature.
You can restore a previously save configuration file to the P-336M.
Enter the name of the configuration file or click Browse to locate it and click
Restore Configuration From File to start the file upload process.
Click Save Configuration to save the current device configuration to your
computer.
Click Cancel to start configuring this screen again.
ZyXEL P-336M User's Guide
Figure 30 on page 67).
68