ZyXEL P-336M User's Guide
Figure 24 Advanced: MAC Filter
The following table describes the labels in this screen.
Table 23 Advanced: MAC Filter
LABEL
Enable
Filter Settings
Mode
Filter Wireless
Clients
Filter Wired
Clients
Add MAC Address
Enable
MAC Address
57
DESCRIPTION
Select Enable MAC Address Filter to activate this setting. Clear this check box to
disable it.
Select only deny listed machines to block frames to/from the specified MAC
address(es).
Select only allow listed machines to forward frames to/from the specified MAC
address(es).
Select this option to apply the filter settings to the wireless clients.
Select this option to apply the filter settings to the wired computers on the LAN.
Select Enable to activate this filter setting. Clear this check box to disable it.
Enter the MAC address (in six pairs of dotted haxidecimal notation) of a computer
whose traffic you want to filter. Or select a computer from the drop-down list box.
Chapter 4 Advanced