Virtual Server; Table 15 Advanced: Game Hosting - ZyXEL Communications P-336M User Manual

ZyXEL P-336M User's Guide
The following table describes the fields in this screen.

Table 15 Advanced: Game Hosting

LABEL
Enable
Name
IP Address
TCP Ports to Open Specify the TCP port(s) for the application. You can enter a port number and/or a
UDP Ports to
Open
Inbound Filter
Schedule
Save
Clear
Game Rules List
Enable
Name
IP Address
TCP Ports
UDP Ports
Inbound Filter
Schedule

4.2 Virtual Server

With the virtual server (also known as port forwarding) feature, you can make inside (behind
NAT on the LAN) servers, for example, web or FTP, visible to the outside world even though
NAT makes your whole inside network appear as a single computer to the outside world.
43
DESCRIPTION
Click Enable to activate this feature.
Clear this check box to deactivate this feature. Note that some Internet applications
may not work in your network behind the P-336M.
Enter a descriptive name for this setting.
Alternatively, select a pre-defined application name from the drop-down list box.
The pre-configured port number ranges for the selected application will be
automatically displayed below.
Enter the IP address (in dotted decimal notation) of a local computer hosting the
selected service.
Alternatively, select from the drop-down list box. The IP address of the selected
computer will be displayed in this field.
range of ports. For example, 6159-6180, 99.
Specify the UDP port(s) for the application. You can enter a port number and/or a
range of ports. For example, 6159-6180, 99.
Select a filter action on the traffic. Select You can configure filter actions in the
Inbound Filter screen.
Select the name of a time setting during which this setting is active. You can
configure schedules in the Schedules screen.
Click Save to save the changes of a configuration screen for the current session.
Click Clear to start configuring a screen again.
Select this option to activate this setting. Clear this checkbox to disable this setting.
This field displays the descriptive name for this setting.
This field displays the IP address of the local computer to which the specified traffic
is forwarded.
This field displays the TCP port(s) the specified traffic is forwarded.
This field displays the UDP port(s) the specified traffic is forwarded.
This field displays the name of the filter on the incoming traffic.
This field displays the name of the schedule to use.
Chapter 4 Advanced