The Web Configurator; Introduction; Login; Figure 1 Web Configurator: Login - ZyXEL Communications P-336M User Manual

This chapter introduces you to the P-336M web configurator, gives an overview of the screen
menus and describes the common screen buttons.

2.1 Introduction

The web configurator is an HTML-based management interface that allows easy Prestige
setup and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Note: By default, you can only access the web configurator through a LAN port. To
access via the WAN, enable remote management in the Admin screen.

2.2 Login

Follow the steps below to log into the web configurator.
1 Start your web browser.
2 Type "http://" and the IP address of the Prestige (for example, the default is 192.168.1.1)
in the Location or Address field. Press [ENTER].
3 The login screen appears. Select admin in the User Name field to log in as an
administrator.
4 Enter the associated password. The default administrative login password is "1234".

Figure 1 Web Configurator: Login

Chapter 2 The Web Configurator

The Web Configurator

ZyXEL P-336M User's Guide
C
H A P T E R
2
20