Hardware Connection And Wizard Setup; Front Panel Leds; Table 1 Front Panel Leds - ZyXEL Communications P-336M User Manual

ZyXEL P-336M User's Guide
• WPA2/WPA (Wi-Fi Protected Access) authorizes and identifies users based with a secret
key that changes automatically at regular intervals, for example: Pre Shared Key mode
means that the home user, without a RADIUS server, will obtain a new security key every
time he or she connects to the network, vastly improving the safety of communications on
the said network.
• User-friendly configuration and diagnostic utilities.
• Connect multiple computers to a Cable or DSL modem to share a single Internet
connection.
• DHCP server enables all networked computers to automatically receive IP addresses.
• Web-based interface for easy management and configuration.
• Supports multi-connection applications.
• Equipped with four 10/100 Ethernet ports, one WAN port all with Auto MDI/MDIX.

1.3 Hardware Connection and Wizard Setup

Follow the instructions in the Quick Start Guide to connect the P-336M and configure the
wizard screens.

1.3.1 Front Panel LEDs

The following table describes the front panel LEDs.

Table 1 Front Panel LEDs

LED COLOR
PWR
Green
LAN
Green
WAN
Green
WLAN
Green
USB
Green
19
STATUS DESCRIPTION
Off The P-336M is not receiving power.
On The P-336M is receiving power and ready.
Blinking The P-336M is resetting to the factory defaults.
Off No device is connected to this port.
On An Ethernet device is connected to this port.
Blinking The P-336M is sending/receiving data on this port.
Off The WAN connection is not ready, or has failed.
On The P-336M has a successful WAN connection.
Blinking The P-336M is sending/receiving data.
Off The WLAN connection is turned off.
On The WLAN is active.
Blinking The WLAN is sending/receiving data.
Off The USB port is currently not in use
Blinking (3 Windows Connect Now setup is successful.
Times)
Blinking Windows Connect Now setup is not successful.
(Continuous)
Chapter 1 Getting Started