Figure 69 SNMP Remote Management
The following table describes the labels in this screen.
Table 53 SNMP Remote Management
LABEL
SNMP Configuration
Get Community
Set Community
SNMP
Service Access
Secured Client IP
Address
Apply
Reset
11.5 Security Screen
To change your Prestige's security settings, click the Remote MGMT link under
Management and the Security tab. The screen appears as shown.
If an outside user attempts to probe an unsupported port on your Prestige, an ICMP response
packet is automatically returned. This allows the outside user to know the Prestige exists.
Your Prestige supports anti-probing, which prevents the ICMP response packet from being
sent. This keeps outsiders from discovering your Prestige when unsupported ports are probed.
Chapter 11 Remote Management Screens
DESCRIPTION
Enter the Get Community, which is the password for the incoming Get and
GetNext requests from the management station. The default is public and allows
all requests.
Enter the Set community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
Select the interface(s) through which a computer may access the Prestige using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the Prestige using this service.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
P-320W User's Guide
123