P-320W User's Guide
Note: Do not turn off the Prestige while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into
the Prestige again.
Figure 92 Upload Warning
The Prestige automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 93 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
Figure 94 Upload Error Message
15.2 Configuration Screen
See the Firmware and Configuration File Maintenance chapter for transferring configuration
files using FTP/TFTP commands.
146
Chapter 15 Tools