General Wireless Lan 2.4G/5G Security Screen; No Security - ZyXEL Communications NBG6515 User Manual

Table 38 Network > Wireless LAN 2.4G/5G > General (continued)
LABEL
Security Mode
Apply
Reset
See the rest of this chapter for information on the other labels in this screen.

11.5 General Wireless LAN 2.4G/5G Security Screen

This screen varies depending on whether you chose Static WEP, WPA-PSK or WPA2-PSK to add
security on the selected wireless network. The wireless clients which want to associate to this
network must have same wireless security settings as the NBG. No Security allows any client to
connect to this network without authentication.

11.5.1 No Security

Select No Security to allow wireless stations to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your NBG, your network is accessible
to any wireless networking device that is within range.
Figure 66 Network > Wireless LAN 2.4G/5G > General: No Security
Chapter 11 Wireless LAN
DESCRIPTION
Select Static WEP, WPA-PSK, WPA2-PSK to add security on this wireless network. The
wireless clients which want to associate to this network must have same wireless security
settings as this device. After you select to use a security, additional options appears in this
screen. Section 11.5 on page 85
can select No Security to allow any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Click Apply to save your changes back to the NBG.
Click Reset to begin configuring this screen afresh.
NBG6515 User's Guide
for detailed information on different security modes. Or you
85