CyberData 011511 Operation Manual page 16

3.4.2 Point-to-Point Configuration
Dialing point-to-point allows the device to call and a single endpoint. All CyberData endpoints and
many phones can use this option. To do this, enable SIP Operation, do not enable SIP
Registration, and use the endpoint's IP address as the Dial Out extension. Delayed DTMF is
supported. See
Operations Guide
Figure 3-10.
Figure 3-10. SIP Page Set to Point-to-Point Mode
Device is set to NOT register with a SIP server
932057A
Configure the Device
SIP (Session Initiation Protocol)
CyberData Corporation
10