CyberData 011511 Operation Manual page 11

3.1.2 Restoring Factory Defaults
To restore the device to its factory default settings
approximately seven seconds. After 15 to 20 seconds, "Restoring defaults, rebooting" is announced.
The device will default to DHCP to obtain an IP address, or will use 192.168.1.23 if a DHCP server is
not present.
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
Operations Guide
a
a
a
a. Default if there is not a DHCP server present.
(Table
Table 3-1. Factory Default Settings
Factory Default Setting
DHCP
192.168.1.23
admin
admin
255.255.255.0
192.168.1.1
932057A
Configure the Device
3-1), hold the RTFM button for
CyberData Corporation
5
Home Page